Fits 62-72 Mopar A; Front Disc Converison; Slotted; w/Bolt 5x4.5 DBK6272A-45-LX
Fits 62-72 Mopar A; Front Disc Converison; Slotted; w/Bolt 5x4.5 DBK6272A-45-LX
Estimated Shipping Widget will be displayed here!
Enhance your classic Mopar A-Body vehicle's braking performance with the DBK6272A-45-LX Front Disc Brake Conversion Kit. Designed for 1962-1972 models with a 5x4.5" bolt pattern, this comprehensive kit replaces outdated drum brakes with high-performance drilled and slotted rotors, ensuring improved stopping power and safety.
Key Features:
-
11" Drilled and Slotted Rotors: Provides superior heat dissipation and enhanced braking efficiency.
-
Large Slider-Type Kelsey Hayes Calipers: Ensures reliable and responsive braking performance.
-
Complete Hardware Set: Includes backing plates, stock height spindles, braided stainless steel brake hoses, bearings, seals, dust caps, spindle nuts, spindle washers, and all necessary hardware for straightforward installation.
-
Lower Ball Joint Steering Arm Assembly: Facilitates proper alignment and steering response.
-
Upper Ball Joint Adapters: Allows compatibility without the need to replace upper control arms.
Vehicle Fitment:
This kit is compatible with the following Mopar A-Body models from 1962 to 1972:
-
Dodge: 1963-1976 Dart, 1971-1972 Demon.
-
Plymouth: 1960-1976 Valiant, 1967-1969 Barracuda, 1970-1976 Duster, 1971-1976 Scamp.
Specifications:
-
Rotor Diameter: 11 inches.
-
Bolt Pattern: 5x4.5 inches.
-
Minimum Wheel Size: 14 inches (fits most original 14" rims; does not fit Steely Rims, Cragar Steel SST Rims, Year One Rally, or any drum 14" rim that had smaller than 10" drums).
-
Caliper Material: Cast Iron.
-
Caliper Finish: Natural.
-
Brake Pads: MKD84 Pads included.
Installation Notes:
-
This kit does not require replacing upper control arms, as it includes adapters to fit the existing upper ball joints.
-
Expect approximately a 1/4" outward shift of the wheels toward the fender well.
-
Ensure your vehicle's bolt pattern is 5x4.5 inches before installation.
-
Professional installation is recommended to ensure optimal performance and safety.
Upgrade your Mopar A-Body's braking system with the DBK6272A-45-LX Front Disc Brake Conversion Kit, offering enhanced safety and performance for your classic ride.
Application:
Year | Make | Model | Trim |
---|---|---|---|
1963-1976 | Dodge | Dart | |
1963-1974 | Plymouth | Valiant | |
1970-1976 | Plymouth | Duster | |
1971-1976 | Plymouth | Scamp |
Policies and FAQs
Return Policy
Fault reasons include but are not limited to:
- Buyer was shipped the wrong product
- Buyer was shipped a damaged product
- The product page had incorrect fitment and the part does not fit the Buyer's vehicle
Opened boxes, plastic bags, and other packaging are not considered damage (excluding single use items such as, but not limited to, liquids, software, and other components that cannot be reused/resealed).
FAQs
|Q. What is an Intermediate Brake Line?
|A. This is the line that runs from the front of the vehicle to the rear. On most vehicles it connects to a junction then you will have rear axle lines. On a few cars the intermediate lines will connect to the rear wheels. It is recommended to change the axle lines if you are replacing the intermediate lines.
|Q. What is included in a pre bent brake line kit?
|A. Our kits include all of the solid metal lines for that section of the vehicle
|Q. I need to return something - what's your return policy?
|A. We are happy to help! Please help us to help you by going to our return form and filling out the form as best as you can in order to request a return.
-
Modern Day stands by our parts and is happy to accept returns within 30 days of purchase. Parts must be in new condition.
-
If a part arrives damaged, or is defective, Please report it to us immediately. So we can handle it for your promptly.