Fits Rear GM 1955-68 10/12 Bolt Disc Brake w/E-Brake &Slotted Rotors DBK1012FSLX
Fits Rear GM 1955-68 10/12 Bolt Disc Brake w/E-Brake &Slotted Rotors DBK1012FSLX
Estimated Shipping Widget will be displayed here!
1955-1968 GM Full Size 10/12 Bolt Rear End Disc Brake Kit- You will need to change out your master cylinder and proportioning valve to add disc brakes to the rear of your car.
Complete Rear Disc Brake Conversion Kit Includes:
- 11" GM Drilled & Slotted Rotors Multi Pattern
- Fits 5x4.75" w/ 7/16 Studs & 5x4.5" w/ 1/2 Studs
- Large GM Calipers w/ Self Adjusting E-Brake (1979 Cadillac El Dorado)
- D54 Pads Included
- Caliper Brackets & Spacers
- Bracket Hardware
- Stainless Steel Braided Flex Hoses & Clips
- Emergency Brake Cables
Tech Notes:
- Does not fit S-10 Chassis or truck frames
- Maximum diameter of 6.11" to fit rotor hat.
- Rotor Center = 2 3/4" - Rotor Hat Section Inside Diameter = 6 3/16" You will need to modify your axles if they will not fit inside the rotor
hat and you will need to modify the rotor if the center hole is too small for your axles. - .050x45 Degree Chamfer
- 2.786" max register axle
- Does not Fit 14" Rims Must use 15" or larger
- When installing rear disc brake kit a disc/disc proportioning valve with a 1-1/8" bore master cylinder will be needed ( included in kit )
This kit will push your wheels out an additional .125? per side, longer wheel studs may be required after installation of this kit
*Note: The emergency brake cables provided in the kit will fit 55 - 64 Full Size Chevrolet. Any other application will require the customer to modify the included cables to work with their application. The intermediate cable, center pull and cable couplers may not be necessary on 58 ? 64 cars.
**Will not work on 1959-64 Pontiac Bonneville, Grand Prix, Catalina, Ventura.**
Policies and FAQs
Return Policy
Fault reasons include but are not limited to:
- Buyer was shipped the wrong product
- Buyer was shipped a damaged product
- The product page had incorrect fitment and the part does not fit the Buyer's vehicle
Opened boxes, plastic bags, and other packaging are not considered damage (excluding single use items such as, but not limited to, liquids, software, and other components that cannot be reused/resealed).
FAQs
|Q. What is an Intermediate Brake Line?
|A. This is the line that runs from the front of the vehicle to the rear. On most vehicles it connects to a junction then you will have rear axle lines. On a few cars the intermediate lines will connect to the rear wheels. It is recommended to change the axle lines if you are replacing the intermediate lines.
|Q. What is included in a pre bent brake line kit?
|A. Our kits include all of the solid metal lines for that section of the vehicle
|Q. I need to return something - what's your return policy?
|A. We are happy to help! Please help us to help you by going to our return form and filling out the form as best as you can in order to request a return.
-
Modern Day stands by our parts and is happy to accept returns within 30 days of purchase. Parts must be in new condition.
-
If a part arrives damaged, or is defective, Please report it to us immediately. So we can handle it for your promptly.